Move Y-axis

rcavedo · May 1st, 2002, 10:47 AM

How do i move the y-axis from one side of the chart to the other?

Asala42 · May 1st, 2002, 11:24 AM

Hiya,

If you have one series, you can select the series/format series/Axis Tab/secondary.

Adam

rcavedo · May 1st, 2002, 12:16 PM

Sorry I did not give a full explanation.
I am using a surface graph with 7 series.

Bob

Asala42 · May 1st, 2002, 12:30 PM

Hey again,

Can you get away with this method?

Select your X-Axis/Format Axis/Scale Tab/enable the "Value (Y) Axis Crosses at maximum category"

I believe most charts will give that option - although I'm not sure with a surface chart.

Adam

rcavedo · May 1st, 2002, 12:59 PM

Works perfectily!
Thanks
Bob

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

May 1st, 2002, 10:47 AM	#1
rcavedo New Member Join Date: Apr 2002 Location: Robert F. Cavedo Posts: 26	How do i move the y-axis from one side of the chart to the other?

May 1st, 2002, 11:24 AM	#2
Asala42 Board Regular Join Date: Feb 2002 Location: Southfield,MI USA Posts: 1,027	Hiya, If you have one series, you can select the series/format series/Axis Tab/secondary. Adam

May 1st, 2002, 12:16 PM	#3
rcavedo New Member Join Date: Apr 2002 Location: Robert F. Cavedo Posts: 26	Sorry I did not give a full explanation. I am using a surface graph with 7 series. Bob

May 1st, 2002, 12:30 PM	#4
Asala42 Board Regular Join Date: Feb 2002 Location: Southfield,MI USA Posts: 1,027	Hey again, Can you get away with this method? Select your X-Axis/Format Axis/Scale Tab/enable the "Value (Y) Axis Crosses at maximum category" I believe most charts will give that option - although I'm not sure with a surface chart. Adam

May 1st, 2002, 12:59 PM	#5
rcavedo New Member Join Date: Apr 2002 Location: Robert F. Cavedo Posts: 26	Works perfectily! Thanks Bob